Log out Go to App
Go to App

Learning Materials

Features

Discover

Chapter 3: Problem 5

Consider steady heat transfer through the wall of a room in winter. The convection heat transfer coefficient at the outer surface of the wall is three times that of the inner surface as a result of the winds. On which surface of the wall do you think the temperature will be closer to the surrounding air temperature? Explain.

Short Answer

Expert verified
Answer: The outer surface of the wall will have a temperature closer to the surrounding air temperature compared to the inner surface. This is because the higher convection heat transfer coefficient caused by winds on the outer surface allows for more efficient heat transfer, thus maintaining a smaller temperature difference between the surface and the air.

Step by step solution

01

Understand the problem

We need to compare the temperatures at the inner and outer surfaces of the wall, taking into consideration the convection heat transfer coefficients at both surfaces.
02

Convection heat transfer coefficients

Let's denote the convection heat transfer coefficient at the outer surface as h_out and the one at the inner surface as h_in. According to the problem statement, we have h_out = 3 * h_in.
03

Heat conduction through the wall

We can express the heat conduction through the wall using Fourier's Law of heat conduction, given by: q = -k * (dT/dx) Where q is the heat flux, k is the thermal conductivity of the wall, dT/dx is the temperature gradient across the wall.
04

Heat convection at the surfaces

Heat convection at both surfaces can be expressed using Newton's Law of cooling, as follows: For the outer surface: q = h_out * (T_wall,out - T_air,out) For the inner surface: q = h_in * (T_wall,in - T_air,in)
05

Steady heat transfer condition

Given that heat transfer is steady, the heat flux through the wall must be equal to heat convection at both surfaces. Therefore, h_out * (T_wall,out - T_air,out) = h_in * (T_wall,in - T_air,in)
06

Solve for the temperature difference

From the previous step, we can rewrite the equation in terms of temperature difference: 3 * (T_wall,out - T_air,out) = (T_wall,in - T_air,in)
07

Determine which surface is closer to the air temperature

Since the outer surface has a higher convection heat transfer coefficient (h_out = 3 * h_in), the temperature difference between the outer surface and the surrounding air temperature will be smaller than the temperature difference between the inner surface and the surrounding air temperature. Therefore, the temperature at the outer surface of the wall will be closer to the surrounding air temperature compared to the inner surface. This is because the higher convection heat transfer coefficient caused by winds on the outer surface allows for more efficient heat transfer, thus maintaining a smaller temperature difference between the surface and the air.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Start your free trial

Over 30 million students worldwide already upgrade their learning with Vaia!

Key Concepts

These are the key concepts you need to understand to accurately answer the question.

Convection Heat Transfer Coefficient
Heat transfer between a solid surface and the adjacent fluid that is in motion is described by the convection heat transfer coefficient, represented by the symbol 'h'. This coefficient measures the rate at which heat is transferred per unit area and per degree of temperature difference between the surface and the fluid. Essentially, a high 'h' means heat can more efficiently move from the surface to the fluid or vice versa.

For example, when the wind increases outside the room mentioned in our original exercise, the convection heat transfer coefficient at the wall's outer surface increases. This leads to a higher rate of heat loss from the wall to the cold outside air, which conveys the idea that with a higher 'h_out', the wall is more effective at

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Consider a house whose attic space is ventilated effectively so that the air temperature in the attic is the same as the ambient air temperature at all times. Will the roof still have any effect on heat transfer through the ceiling? Explain.

Two plate fins of constant rectangular cross section are identical, except that the thickness of one of them is twice the thickness of the other. For which fin is the \((a)\) fin effectiveness and \((b)\) fin efficiency higher? Explain.

A 4-mm-diameter and 10-cm-long aluminum fin \((k=237 \mathrm{~W} / \mathrm{m} \cdot \mathrm{K})\) is attached to a surface. If the heat transfer coefficient is \(12 \mathrm{~W} / \mathrm{m}^{2} \cdot \mathrm{K}\), determine the percent error in the rate of heat transfer from the fin when the infinitely long fin assumption is used instead of the adiabatic fin tip assumption.

Consider two walls, \(A\) and \(B\), with the same surface areas and the same temperature drops across their thicknesses. The ratio of thermal conductivities is \(k_{A} / k_{B}=4\) and the ratio of the wall thicknesses is \(L_{A} / L_{B}=2\). The ratio of heat transfer rates through the walls \(\dot{Q}_{A} / \dot{Q}_{B}\) is (a) \(0.5\) (b) 1 (c) \(2 \quad(d) 4\) (e) 8

A \(0.2\)-cm-thick, 10-cm-high, and 15 -cm-long circuit board houses electronic components on one side that dissipate a total of \(15 \mathrm{~W}\) of heat uniformly. The board is impregnated with conducting metal fillings and has an effective thermal conductivity of \(12 \mathrm{~W} / \mathrm{m} \cdot \mathrm{K}\). All the heat generated in the components is conducted across the circuit board and is dissipated from the back side of the board to a medium at \(37^{\circ} \mathrm{C}\), with a heat transfer coefficient of \(45 \mathrm{~W} / \mathrm{m}^{2} \cdot \mathrm{K}\). (a) Determine the surface temperatures on the two sides of the circuit board. (b) Now a 0.1-cm-thick, 10-cm-high, and 15 -cm-long aluminum plate \((k=237 \mathrm{~W} / \mathrm{m} \cdot \mathrm{K})\) with \(200.2\)-cm-thick, 2-cm-long, and \(15-\mathrm{cm}\)-wide aluminum fins of rectangular profile are attached to the back side of the circuit board with a \(0.03-\mathrm{cm}-\) thick epoxy adhesive \((k=1.8 \mathrm{~W} / \mathrm{m} \cdot \mathrm{K})\). Determine the new temperatures on the two sides of the circuit board.
See all solutions

Recommended explanations on Physics Textbooks

Electricity and Magnetism

Read Explanation

Oscillations

Read Explanation

Solid State Physics

Read Explanation

Wave Optics

Read Explanation

Turning Points in Physics

Read Explanation

Electric Charge Field and Potential

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free