Two semi-infinite grounded conducting planes meet at right angles. In the region between them, there is a point chargeq, situated as shown in Fig. 3.15. Set up the image configuration, and calculate the potential in this region. What charges do you need, and where should they be located? What is the force onq? How much Work did it take to bringqin from infinity? Suppose the planes met at some angle other than; would you still be able to solve the problem by the method of images? If not, for what particular anglesdoesthe method work?

Short Answer

Expert verified

The potential is

The force is F=q216πε0aa2+b23/2-1a2x^+ba2+b23/2-1b2y^, and Workdone to bring q from infinity is W=q216πε01a2+b2-1a-1b, if the planes are placed at arbitrary angles other than 90 degrees, then the problem can't be solved by the method of image charges.

Step by step solution

01

Define an Electric charge.

Electric charge is the fundamental physical property of matter that experiences a force of attraction or repulsion when placed in an electromagnetic field. A unit negative charge can be called an electron, and a positive unit charge is a proton.

02

Determine the potential in the region.

Two semi-infinite conducting planes are kept at right angles hence from equation 3.9. The potential can be written as follows:

V(x,y)=14πε0qx2+y2+(z-d)2-qx2+y2+(z+d)2

Here, the denominator represents the distance of the x-axis and the y-axis from the point charge +q and –q,

Now, as the point charges and their corresponding images are located on the coordinates of x, y-axis named as a and b, respectively, which means

x(x-a)and y(y-b)similarly for image charges it becomes

x(x+a)and y(y+b), therefore putting the values in equation(i) and solve

V(x,y)=14πε0q(x-a)2+(y-b)2+(z)2+q(x+a)2+(y+b)2+(z)2-q(x+a)2+(y-b)2+z2-q(x-a)2+(y+b)2+z2V(x,y)=q4πε01(x-a)2+(y-b)2+z2+1(x+a)2+(y+b)2+z2-1(x+a)2+(y-b)2+z2-1(x-a)2+(y+b)2+z2

The placement of the image charges in the field is shown below:

As shown in the above diagram, we require a +q charge and –q charge and their corresponding locations and locations of their images are also shown in the above figure.

03

Determine the Force on the charged particle.

Since, two like charges are placed in the vicinity, they will experience a force of repulsion. In contrast, unlikely that charged two will experience a force of attraction. Therefore, Hence from equation 3.12, the force equation can be written as:

Fx=-14πε0q2(2d)2x^

Similarly, force in the y direction is as follows:

Fy=-14πε0q2(2d)2y^

Therefore, the resultant force can be written as:

Here cosθ=a/a2+b2and,sinθ=ba2+b2

Therefore, the force equation can be written as:

04

 Step 4: Determine the Work done (W) to bring the charge from infinity.

Its been known that,

W=F.dl

Therefore, the Work done to bring the change q from infinity is:

W=q216πε00aa2+b23/2-1a2x^+ba2+b23/2-1b2y^dxdy=116πε0-q22a+-q22b+q22a2+b2=q216πε0-1a-1b+1a2+b2

05

Validate the method of image charges for other angles excluding 90 degrees.

Consider to work,it must be an integer divisor of 180 degrees. Thus 180,90,60 and 45 degrees,the image charge method is used for these angles, but no other angles will work. It works for 45°, say, with the charges as shown in the figure.Consider it works for 45°, then it has been taken that the x-axis is at equipotential, which means thatif the image charge is placed at the reflection point.

Now, by making the 45° line an equipotential, another charge is placed at the image point, which will screw up the x-axis, so another image charge must be entered to reach the equilibrium state. The method of image charges does not work for arbitrary angles. Here, image charges are eventually forced to place within the original region of interest, which is not allowed for all images as they must go outside the region. The diagram is shown below.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

In Ex. 3.2 we assumed that the conducting sphere was grounded ( V=0). But with the addition of a second image charge, the same basic modelwill handle the case of a sphere at any potentialV0 (relative, of course, to infinity). What charge should you use, and where should you put it? Find the force of attraction between a point charge q and a neutral conducting sphere.

(a) A long metal pipe of square cross-section (side a) is grounded on three sides, while the fourth (which is insulated from the rest) is maintained at constant potential V0.Find the net charge per unit length on the side oppositeto Vo. [Hint:Use your answer to Prob. 3.15 or Prob. 3.54.]

(b) A long metal pipe of circular cross-section (radius R) is divided (lengthwise)

into four equal sections, three of them grounded and the fourth maintained at

constant potential Vo.Find the net charge per unit length on the section opposite

to V0.[Answer to both (a) and (b) : localid="1657624161900" -ε0V0ττIn2.]

A rectangular pipe, running parallel to the z-axis (from -to +), has three grounded metal sides, at y=0,y=aand x=0The fourth side, at x=b, is maintained at a specified potential V0(y).

(a) Develop a general formula for the potential inside the pipe.

(b) Find the potential explicitly, for the case V0(y)=V0(a constant).

Two long, straight copper pipes, each of radius R, are held a distance

2d apart. One is at potential V0, the other at -V0(Fig. 3.16). Find the potential

everywhere. [Hint: Exploit the result of Prob. 2.52.]

In Section 3.1.4, I proved that the electrostatic potential at any point

in a charge-free region is equal to its average value over any spherical surface

(radius R )centered at .Here's an alternative argument that does not rely on Coulomb's law, only on Laplace's equation. We might as well set the origin at P .Let Vave(R)be the average; first show that

dVavedR=14πR2V.da

(note that the R2in da cancels the 1/R2out front, so the only dependence on R

is in itself). Now use the divergence theorem, and conclude that if Vsatisfies

Laplace's equation, then,Vave(0)=V(P),forallR18.

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free