Log out Go to App
Go to App

Learning Materials

Features

Discover

Chapter 13: Problem 22

(a) Why is it so important to control the rate of drying of a ceramic body that has been hydroplastically formed or slip cast? (b) Cite three factors that influence the rate of drying, and explain how each affects the rate.

Short Answer

Expert verified
Answer: Controlling the rate of drying is important in hydroplastically formed or slip-cast ceramic bodies to prevent defects such as warping, cracking, or uneven drying, and to ensure consistent results across the entire ceramic piece. Three factors that influence the rate of drying are air temperature, humidity, and the thinness of the ceramic body. Optimal temperature and humidity levels must be maintained to achieve the desired drying rate and prevent defects, while maintaining an appropriate thickness in the ceramic body ensures uniform drying.

Step by step solution

01

Answer (a): Importance of controlling the rate of drying

Controlling the rate of drying is crucial for hydroplastically formed or slip-cast ceramic bodies to prevent defects such as warping, cracking, or uneven drying. In addition, uniform drying allows for better control over the desired final properties and ensures consistent results across the entire ceramic piece.
02

Answer (b): Factors that influence the rate of drying

The rate of drying is influenced by various factors. We will discuss three main factors and their effects on the drying rate: air temperature, humidity, and thinness of the ceramic body.
03

Factor 1: Air temperature

The air temperature plays a significant role in the rate of drying. Higher temperatures will increase the evaporation rate of moisture in the ceramic body, causing faster drying. However, if the temperature is too high, it might result in uneven drying and defects in the ceramic piece. Therefore, it's essential to maintain an optimal temperature to achieve the desired drying rate.
04

Factor 2: Humidity

The humidity of the environment is another critical factor affecting the drying rate. Highly humid conditions slow down the drying process as the surrounding air is already saturated with moisture, making it difficult for water to evaporate from the ceramic body. On the other hand, low humidity levels facilitate faster evaporation and, consequently, faster drying. It's crucial to control humidity levels to strike a balance between too slow and too fast drying rates.
05

Factor 3: Thinness of the ceramic body

The thinness of the ceramic body also impacts the drying rate. Thinner pieces tend to dry faster than thicker ones because of the reduced volume of moisture present and increased surface area in contact with air, which allows for faster evaporation. However, too thin or uneven thickness can lead to uneven drying, resulting in defects. So, it's essential to achieve the appropriate thickness of the ceramic body to ensure uniform drying.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Start your free trial

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Some ceramic materials are fabricated by hot isostatic pressing. Cite some of the limitations and difficulties associated with this technique.

In your own words, briefly describe what happens as a glass piece is thermally tempered.

(a) Explain why residual thermal stresses are introduced into a glass piece when it is cooled. (b) Are thermal stresses introduced upon heating? Why or why not?

From a molecular perspective, briefly explain the mechanism by which clay minerals become hydroplastic when water is added.

For refractory ceramic materials, cite three characteristics that improve with and two characteristics that are adversely affected by increasing porosity.
See all solutions

Recommended explanations on Physics Textbooks

Measurements

Read Explanation

Atoms and Radioactivity

Read Explanation

Further Mechanics and Thermal Physics

Read Explanation

Engineering Physics

Read Explanation

Dynamics

Read Explanation

Torque and Rotational Motion

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free