Log out Go to App
Go to App

Learning Materials

Features

Discover

Chapter 19: Problem 29

What measures may be taken to reduce the likelihood of thermal shock of a ceramic piece?

Short Answer

Expert verified
Answer: To reduce the likelihood of thermal shock in ceramic pieces, some measures include controlling heating/cooling rates, using materials with low thermal expansion coefficients, designing the piece for even heat distribution, pre-stressing the material, and using proper insulation for temperature control.

Step by step solution

01

Understand thermal shock

Thermal shock is a phenomenon that occurs when a material, like a ceramic piece, is exposed to a rapid change in temperature. Due to the uneven expansion and contraction, stress will be induced in the material, which may cause cracks, deformation, or other damages.
02

Measure 1: Control heating/cooling rates

One way to reduce the likelihood of thermal shock is to control the rate of heating and cooling. Gradually increasing or decreasing the temperature allows the ceramic piece to expand or contract uniformly, reducing the stress induced within the material. Avoid sudden exposure to high or low temperatures to minimize stress.
03

Measure 2: Use materials with low thermal expansion coefficient

Another measure to reduce the likelihood of thermal shock is to use ceramic materials with low thermal expansion coefficients. A low thermal expansion coefficient means that the material will undergo less deformation when subjected to temperature changes, ensuring that the stress induced is minimized.
04

Measure 3: Design for even heat distribution

The design of the ceramic piece can also play a significant role in reducing thermal shock. Ensure the piece has a uniform thickness and shape, eliminating any stress concentration points. This design will enable even heat distribution and prevent any localized areas of high stress.
05

Measure 4: Pre-stress the material

Pre-stressing the ceramic material can help to reduce the risk of thermal shock by inducing an opposing stress to counteract the stresses caused by thermal expansion or contraction. This can be achieved by applying a compressive stress on the ceramic piece during manufacturing, which can help to resist the tensile stress caused due to the temperature difference.
06

Measure 5: Proper insulation

Using proper insulation materials around the ceramic piece can help in reducing the rate of heat transfer, leading to more uniform and controlled temperature changes. This insulation will minimize the temperature gradient across the piece, thus reducing the likelihood of thermal shock. In conclusion, to reduce the likelihood of thermal shock in ceramic pieces, we can control the heating/cooling rates, use materials with low thermal expansion coefficients, focus on designing the piece with even heat distribution, pre-stress the material, and use proper insulation for temperature control.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Start your free trial

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Compute the density for nickel at \(500^{\circ} \mathrm{C}\), given that its room-temperature density is \(8.902 \mathrm{~g} / \mathrm{cm}^{3}\). Assume that the volume coefficient of thermal expansion, \(\alpha_{v}\), is equal to \(3 \alpha_{r}\).

Estimate the energy required to raise the temperature of \(2 \mathrm{~kg}\left(4.42 \mathrm{lb}_{\mathrm{m}}\right)\) of the following materials from 20 to \(100^{\circ} \mathrm{C}\) (68 to,

Briefly explain why metals are typically better thermal conductors than ceramic materials.

The constant \(A\) in Equation \(19.2\) is \(12 \pi^{4} R / 5 \theta_{\mathrm{D}}^{3}\), where \(R\) is the gas constant and \(\theta_{\mathrm{D}}\) is the Debye temperature \((\mathrm{K})\). Estimate \(\theta_{\mathrm{D}}\) for copper, given that the specific heat is \(0.78 \mathrm{~J} / \mathrm{kg} \cdot \mathrm{K}\) at \(10 \mathrm{~K}\).

The two ends of a cylindrical rod of 1025 steel \(75.00 \mathrm{~mm}\) long and \(10.000 \mathrm{~mm}\) in diameter are maintained rigid. If the rod is initially at \(25^{\circ} \mathrm{C}\), to what temperature must it be cooled to have a \(0.008-\mathrm{mm}\) reduction in diameter?
See all solutions

Recommended explanations on Physics Textbooks

Energy Physics

Read Explanation

Electrostatics

Read Explanation

Mechanics and Materials

Read Explanation

Torque and Rotational Motion

Read Explanation

Physics of Motion

Read Explanation

Nuclear Physics

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free