Log out Go to App
Go to App

Learning Materials

Features

Discover

Chapter 6: Problem 36

Explain the differences in grain structure for a metal that has been cold worked and one that has been cold worked and then recrystallized.

Short Answer

Expert verified
Answer: The main differences in grain structures between cold worked metals and cold worked-recrystallized metals are the grain boundary shape and dislocation density. In cold worked metals, the grain boundaries are more irregular, the grains are elongated, and the dislocation density is higher, resulting in increased strength and hardness but decreased ductility. In cold worked-recrystallized metals, the grain boundaries are more regular, new strain-free grains are formed, and the dislocation density is lower, leading to decreased strength and hardness but increased ductility.

Step by step solution

01

Define Cold Working

Cold working is a process in which the metal is deformed at a temperature below the metal's recrystallization temperature. This causes the grain structure to change due to the introduction of a large amount of dislocations in the metal structure, which eventually leads to an increase in the metal's strength and hardness properties.
02

Define Recrystallization

Recrystallization is a process that occurs when a cold worked metal is heated to a temperature that allows it to recover its original grain structure. This heating causes the dislocations to rearrange and form new, strain-free grains. As a result, the metal's properties are altered, typically reducing the hardness and strength but increasing the ductility.
03

Cold Worked Metal Grain Structure

When a metal goes through cold working, the grain structure undergoes a significant change. As the material is deformed, dislocations are introduced and the grains become elongated and distorted. The grain boundaries become more irregular, and the overall density of dislocations in the metal increases. This increased dislocation density strengthens the metal and increases its hardness, but also makes it less ductile.
04

Cold Worked and Recrystallized Metal Grain Structure

When a cold worked metal undergoes recrystallization, the grain structure experiences another change. As the metal is heated, new strain-free grains grow in the areas with high dislocation density, replacing the previous distorted grains. This new grain structure has fewer dislocations and more regular grain boundaries. As a result, the metal's hardness and strength are decreased, while its ductility increases.
05

Comparing the Grain Structures

The main differences in grain structures between a cold worked metal and a cold worked and recrystallized metal lie in the grain boundary shape and the dislocation density. The cold worked metal has irregular grain boundaries, elongated grains, and a higher dislocation density, which leads to increased strength and hardness but decreased ductility. On the other hand, the cold worked and recrystallized metal has more regular grain boundaries, new strain-free grains, and a lower dislocation density, which results in decreased strength and hardness but increased ductility.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Start your free trial

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Consider a single crystal of some hypothetical metal that has the BCC crystal structure and is oriented such that a tensile stress is applied along a [121] direction. If slip occurs on a (101) plane and in a [111] direction, compute the stress at which the crystal yields if its critical resolved shear stress is \(2.4 \mathrm{MPa}\).

Briefly cite the differences between the recovery and recrystallization processes.

(a) What is the driving force for recrystallization? (b) What is the driving force for grain growth?

An aluminum bar \(125 \mathrm{~mm}\) (5.0 in.) long and having a square cross section \(16.5 \mathrm{~mm}(0.65 \mathrm{in}\).) on an edge is pulled in tension with a load of 66,700 \(\mathrm{N}\left(15,000 \mathrm{lb}_{\mathrm{f}}\right)\) and experiences an elongation of \(0.43 \mathrm{~mm}\left(1.7 \times 10^{-2}\right.\) in.). Assuming that the deformation is entirely elastic, calculate the modulus of elasticity of the aluminum.

An undeformed specimen of some alloy has an average grain diameter of \(0.050 \mathrm{~mm}\). You are asked to reduce its average grain diameter to \(0.020 \mathrm{~mm}\). Is this possible? If so, explain the procedures you would use and name the processes involved. If it is not possible, explain why.
See all solutions

Recommended explanations on Physics Textbooks

Turning Points in Physics

Read Explanation

Torque and Rotational Motion

Read Explanation

Electricity

Read Explanation

Geometrical and Physical Optics

Read Explanation

Famous Physicists

Read Explanation

Electricity and Magnetism

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free