An automobile traveling on a highway has an average kinetic energy of . Its mass is . What is its average speed? Convert your answer to miles per hour to see whether it makes sense. If you could use all of themc2rest energy of some amount of fuel to provide the car with its kinetic energy of , What mass of fuel would you need?

Short Answer

Expert verified

The average speed of the automobile is 12MS-1.

The speed of the automobile in miles per hour is 26.85 Miles/h .

The mass of fuel needed is 1.22×1012kg.

Step by step solution

01

Definition of kinetic energy

The kinetic energy is given by:

k=12mv2

Here mis the mass of the object, and vis the velocity of the object.

A simple approximate expression for the kinetic energy of the car can be obtained by comparing the speed v of a particle to the speed of light v<<c.

02

Determine the velocity of the automobile

Let vbe the automobile's speed.

In the given scenario, the kinetic energy is negligible compared to the rest energy, with the kinetic energy being approximately zero at low speeds.

Solve the formula of kinetic energy for v.

v=2Km

Substitute the kinetic energy of the automobilek=1.1×105and its massm=1500kg into the obtained formula,

v=2×1.1×1015J1500kg=2×1.1×1051J×1kgm/s21J15001kg=12.0m/s

Convert the units of the speed into mile/h by using the conversion 1mile=1609m and 1h=3600s.

v=12.0ms×1mile1609m×3600s1h26.85miles/h

Thus, the average speed is12.0m/s and in miles per hour the speed is 26.85miles/h.

03

Calculation for the mass of fuel

The rest energy of the fuel is given by:

.Erest=mc2

Substitute Erest=1.1×105Jand c=3×108m/sinto the formula and solve for m.

role="math" localid="1654159452050" 1.1×105J=m3×108m/sm=1.1×1051J×1kgm/s21J3×10821m/s2=1.22×10-12kg

Thus, the mass of fuel needed is1.22×10-12kg.

As illustrated, a small amount of fuel is sufficient to propel the vehicle at a speed of 26.85miles/h.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A proton(H1)and a deuteron ((H2), “heavy” hydrogen) start out far apart. An experimental apparatus shoots them toward each other (with equal and opposite momenta). If they get close enough to make actual contact with each other, they can react to form a helium-3nucleus and a gamma ray (a high-energy photon, which has kinetic energy but zero rest energy):H1+2H3He+y

This is one of the thermonuclear or fusion reactions that takes place inside a star such as our Sun.

The mass of the proton is 1.0073 u(unified atomic mass unit,1.7×10-27kg), the mass of the deuteron is 2.0136 u, the mass of the helium-3nucleus is 3.0155 u, and the gamma ray is massless. Although in most problems you solve in this course it is adequate to use values of constants rounded to two or three significant figures, in this problem you must keep at least six significant figures throughout your calculation. Problems involving mass changes require many significant figures because the changes in mass are small compared to the total mass. (a) The strong interaction has a very short range and is essentially a contact interaction. For this fusion reaction to take place, the proton and deuteron have to come close enough together to touch. The approximate radius of a proton or neutron is about1×10-15m. What is the approximate initial total kinetic energy of the proton and deuteron required for the fusion reaction to proceed, in joules and electron volts (1eV=1.6×10-19J)? (b) Given the initial conditions found in part (a), what is the kinetic energy of theHe3plus the energy of the gamma ray, in joules and in electron volts? (c) The net energy released is the kinetic energy of theHe3plus the energy of the gamma ray found in part (b), minus the energy input that you calculated in part (a). What is the net energy release, in joules and in electron volts? Note that you do get back the energy investment made in part (a). (d) Kinetic energy can be used to drive motors and do other useful things. If a mole of hydrogen and a mole of deuterium underwent this fusion reaction, how much kinetic energy would be generated? (For comparison, aroundare obtained from burning a mole of gasoline.) (e) Which of the following potential energy curvesin Figure 6.87 is a reasonable representation of the interaction in this fusion reaction? Why?

As we will study later, the average kinetic energy of a gas molecule is32kbT, whereis the “Boltzmann constant,”1.4×10-23J/K, andis the absolute or Kelvin temperature, measured from absolute zero (so that the freezing point of water is273K). The approximate temperature required for the fusion reaction to proceed is very high. This high temperature, required because of the electric repulsion barrier to the reaction, is the main reason why it has been so difficult to make progress toward thermonuclear power generation. Sufficiently high temperatures are found in the interior of the Sun, where fusion reactions take place.

A jar of honey with a mass of 0.5 kgis nudged off the kitchen counter and falls 1 mto the floor. What force acts on the jar during its fall? How much work is done by this force?

One end of a spring whose spring constant is 20N/mis attached to the wall, and you pull on the other end, stretching it from its equilibrium length of 0.2mto a length of 0.3m. Estimate the work done by dividing the stretching process into two stages and using the average force you exert to calculate work done during each stage.

This problem is closely related to the spectacular impact of the comet Shoemaker-Levy with Jupiter in July 1994:

http://www.jpl.nasa.gov/sl9/ sl9.html

A rock far outside our solar system is initially moving very slowly relative to the Sun, in the plane of Jupiter’s orbit around the Sun. The rock falls towards the Sun, but on its way to the Sun it collides with Jupiter. Calculate the rock’s speed just before colliding with Jupiter. Explain your calculation and any approximations that you make.

Msun=2×1030kg,MJuipter=2×1027kg

Distance, Sun to Jupiter =8×1011m

Radius of Jupiter1.4×108m

A nucleus whose mass is 3.917268×1025kg undergoes spontaneous alpha decay. The original nucleus disappears and there appear two new particles: a He-4 nucleus of mass6.640678×1027kg (an alpha particle consisting of two protons and two neutrons) and a new nucleus of mass3.850768×1025kg . (Note that the new nucleus has less mass than the original nucleus, and it has two fewer protons and two fewer neutrons.)

(a) What is the total kinetic energy of the alpha particle and the new nucleus?

(b) Use the conservation of momentum in order to determine the kinetic energy of the alpha particle and kinetic energy of the new nucleus.

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free