A runner whose mass is 50 kgaccelerates from a stop to a speed of10 m / s in 3 s. (A good sprinter can run100 m in about 10 s, with an average speed of 10 m / s.) (a) What is the average horizontal component of the force that the ground exerts on the runner’s shoes? (b) How much displacement is there of the force that acts on the sole of the runner’s shoes, assuming that there is no slipping? Therefore, how much work is done on the extended system (the runner) by the force you calculated in the previous exercise? How much work is done on the point particle system by this force? (c) The kinetic energy of the runner increases—what kind of energy decreases? By how much?

Short Answer

Expert verified

a) 167N

b) There is no work done on the extended system due to zero displacement and , the work done on the particle system is 2500 J.

c) Decrease in the internal energy by 2500 J.

Step by step solution

01

Identification of the given data

The given data can be listed below as,

  • The mass of the runner is, 50 kg.
  • The velocity of the runner is, 10 m / s.
  • The time taken by the runner is, 3 s.
02

Significance of the law of conservation of work done and Newton’s second law for the runner

The law of conservation of work done states that energy cannot be destroyed or created, it can only be converted into different forms.

The second law of Newton states that the force exerted is directly proportional to the product of the mass and the acceleration of a body.

According to the work-energy theorem, the work done is the same as that of the change in the kinetic energy.

03

Determination of force’s horizontal component exerted by the ground on the shoes of the runner (a)

The expression for the horizontal component of the force can be expressed as,

F=ma=mvt

Here, m is the mass of the runner, a is the acceleration of the runner that is a=vt (here, v is the velocity of the runner and is the time taken by the runner).

For m=50kg,v=10m/s, and t = 3 s.

F=50kg×10m/s3s=166.66kg.m/s2=166.66kg.m/s2×1N1kg.m/s2167N

Thus, the average horizontal component of the force is 167 N.

04

Determination of the displacement and the work done (b)

The expression for the displacement of the runner is expressed as,

s = ut

Here, u is the initial velocity of the runner’s shoes that is 0 and tis the time taken.

Substitute all the values in the above equation.

s=0m/s×3s=0m

Thus, the displacement of the runner’s shoes is 0.

The expression for work done on the extended system can be expressed as,

W=F.d

Here, F is the force and is the displacement of the runner.

For F = 167 N and d = 0.

W=167N×0=0

Thus, the work done on the extended system is 0.

From the law of conservation of work done, the equation of the work done on the point particle system can be expressed as,

W1=12mv2

Here, W1is the work done on the point particle system.

For m = 50 kg andv = 10 m/s.|
W=12×50kg×(10m/s)2 =2500kg.m2/s2=2500kg.m2/s2×1J1kg.m/s2=2500J

Thus, the work done on the point particle system by this force is 2500 J.

05

Determination of the energy that decreases (c)

By the work energy theorem, the work done is same as that of the change in the kinetic energy.

As the Kinetic energy of the runner increases, the internal or the chemical energy of the runner decreases.

As the work done on the point particle system is 2500 J so the internal energy also decreased by 2500 J .

Thus, the internal energy decreases and it reduces to 2500 J .

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Discuss qualitatively the motion of the atoms in a block of steel that falls onto another steel block. Why and how do large-scale vibrations damp out?

String is wrapped around an object of mass 1.5kg and moment of inertia 0.0015kg-m2(the density of the object is not uniform). With your hand you pull the string straight up with some constant force F such that the center of the object does not move up or down, but the object spins faster and faster (Figure 9.62). This is like a yo-yo; nothing but the vertical string touches the object. When your hand is a height y0=0.25mabove the floor, the object has an angular speed ω0=12rad/s. When your hand has risen to a height y=0.35m above the floor, what is the angular speed of the object? Your answer must be numeric and not contain the symbol F.

A string is wrapped around a disk of mass 2.1 kg (its density is not necessarily uniform). Starting from rest, you pull the string with a constant force of 9 N along a nearly frictionless surface. At the instant when the center of the disk has moved a distance 0.11 m, your hand has moved a distance of 0.28 m (Figure 9.51).


(a) At this instant, what is the speed of the center of mass of the disk? (b) At this instant, how much rotational kinetic energy does the disk have relative to its center of mass? (c) At this instant, the angular speed of the disk is 75 rad/s. What is the moment of inertia of the disk?

Two disks are initially at rest, each of mass M, connected by a string between their centers, as shown in Figure 9.55. The disks slide on low-friction ice as the center of the string is pulled by a string with a constant force F through a distance d. The disks collide and stick together, having moved a distance b horizontally.

(a) What is the final speed of the stuck-together disks? (b) When the disks collide and stick together, their temperature rises Calculate the increase in internal energy of the disks assuming that the process is so fast that there is insufficient time for there to be much transfer of energy to the ice due to a temperature difference. (Also ignore the small amount of energy radiated away as sound produced in the collisions between the disks)

If an object has a moment of inertia 19kg·m2 and rotates with an angular speed of 70rad/s, what is its rotational kinetic energy?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free