In section 10.2 , we discussed two-lobed px,pyandpzand states and 4 lobed hybrid sp3 states. Another kind of hybrid state that sticks out in just one direction is the sp, formed from a single p state and an s state. Consider an arbitrary combination of the 2s state with the 2pz state. Let us represent this bycos2,0,0+sin2,1,0(The trig factors ensure normalization in carrying out the integral , cross terms integrate to 0.leaving

cos2τ|ψ2,0,0|2dv+sin2τ|ψ2.1.0|2dv Which is 1.)

  1. Calculate the probability that an electron in such a state would be in the +z-hemisphere.(Note: Here, the cross terms so not integrate to 0 )
  2. What value of𝛕leads to the maximum probability, and what is the corresponding ratio ofψ2.0.0 andψ2.0.0 ?
  3. Using a computer , make a density (Shading) plot of the probability density-density versus r and𝛉- for the𝛕-value found in part (b).

Short Answer

Expert verified

(a) The probability for an electron in this state in the +z hemisphere is12-38sin2τ.

The maximum of the probability is taken whenτ=-45°,the maximum is12+38=78.

(b)


Step by step solution

01

Significance of the probability

Probability is a way to gauge how likely something is to happen. Many things are difficult to forecast with absolute confidence. Using it, we can only make predictions about how probable an event is to happen, or its chance of happening.

02

Probability of Finding arbitrary State in the +z hemisphere

The arbitrary State is Given bycosτψ2,0,0+sinτψ2,1,0. Let the Probability of finding it in +z =P

P=0π2sinθ.dθ02πdϕcosτψ2,0,0+sinτψ2,1,0cosτψ*2,0,0+sinτψ*2,1,0cos2τ0π2sinθ.dθ02πdϕψ2,0,02+sin2τ0π2sinθ.dθ02πdϕψ2,1,02+cosτsinτ0π2sinθ.dθ02πdϕ(ψ2,0,0ψ*2,1,0+ψ2,1,0ψ*2,0,0)0r2drR2,0rR2,3r

We will only perform the integral for the radial direction for the cross terms since otherwise it is due to normalisation.

localid="1659782296366" 0π2sinθ.dθ02πdϕψ2,0,02=0π2sinθ.dθ02πdϕ14π=120π2sinθ.dθ02πdϕψ2,0,0ψ*2,1,0+ψ2,1,0ψ*2,0,0=0π2sinθ.dθ02πdϕ2(14π)(34πcosθ)=30π2sinθcosθ.dθ=340π2sin2θ.dθ=320r2drR2,0rR2,3r=0r2dr12a0322(1-22a0)e-r2a012a032x12a032xr3a0e-r2a0=183dr2r3-r4e-r=-32

Probability equals

P=12cos2τ+12sin2τ+32(-32)cosτsinτ=12-34cosτsinτ=12-34sin2τ

So, The probability for an electron in this state in the +z hemisphere is12-38sin2τ

03

To Find the Maximum of the Probability.

The maximum of the probability is taken when τ=-45°,the maximum is 12+38=78.

In this Case cosτ=-sinτ=22,thus the corresponding ratio of two wave function is 1:-1

04

Calculation of Probability Density.

The Probability density as a function ofr,θis equal to, the radius is in units ofα0

Pr,θ=ψ2,0,0-ψ2,1,0ψ2,0,0-ψx2,1,0(2(1-r2)e-r2-rcosθe-r2)2=2-r-cosθ2e-r

The Plot is as follows,whereθchanges from 0 toπfrom Top to bottom. The x-axis is theRadius in term ofα0.From the plot we can see that the probability density is largest whenθis between 0 andπ2,that is +z axis..

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

As noted in example 10.2, the HD molecule differs from H2in that a deuterium atom replaces a hydrogen atom (a) What effect, if any, does the replacement have on the bond length and force constant? Explain. (b) What effect does it have on the rotational energy levels ? (c) And what effect does it have on the vibrational energy levels.?

Doubly ionized lithium , Li2, absorbs a photon and jumps from the ground state to its n=2level. What was the wavelength of the photon?

The ψ2,1,0state –2p the state in which mI=0has most of its probability density along the z-axis, and so it is often referred to as a 2pzstate. To allow its probability density to stick out in other ways and thus facilitate various kinds of molecular bonding with other atoms, an atomic electron may assume a wave function that is an algebraic combination of multiple wave functions open to it. One such “hybrid state” is the sum ψ2,1,0=ψ2,1,-1(Note: Because the Schrodinger equation is a linear differential equation, a sum of solutions with the same energy is a solution with that energy. Also, normalization constants may be ignored in the following questions.)

(a) Write this wave function and its probability density in terms of r, θ, and ϕ, (Use the Euler formula to simplify your result.)

(b) In which of the following ways does this state differ from its parts (i.e., ψ2,1,+1and ψ2,1,-1) and from the 2pz state: Energy? Radial dependence of its probability density? Angular dependence of its probability density?

(c) This state is offer is often referred to as the 2pz. Why?

(d) How might we produce a 2pystate?

A particle experiences a potential energy given byU(x)=(x2-3)e-x2

  1. Make a sketch of ofU(x), with numerical values of minima and maxima.
  2. What is the maximum energy that a particle can have and yet be bound?
  3. What is the maximum energy that a particle can have and yet be bound for a considerable amount of time?
  4. Is it possible for a particle to have more energy than in part (c) and still be bound for some period of time?

71. In many kinds of integrated circuits. the preferred element of amplification/switching is nor the bipolar transistor discussed in the chapter, but the MOSFET (metal oxide semiconductor field effect transistor). Thecompany diagram shows one in its "normally off" state: Conduction electrons cannot flow from the n-type source, which is analogous to the emitter. "over the bump" in the ptype region to the n-type drain. analogous to the collector. (Annpn arrangement is shown. but just as for the bipolar transistor, a pnp would yield the complementary device.) The important difference is that rather than a direct electrical contact to the p-type region, as in the base of the bipolar, the centre lead, the gate, is a conductor bonded to the p-type region but separated by a thin insulating layer.

(a) Explain how applying a bias to the gate can cause this device to tum on. Should the gate bias voltage be positive or negative (relative to the source)? Why is the control mechanism referred to as "field effect"?

(b) The MOSFET is often said to be a "unipolar" device because valence holes (conduction elections in the pnp device) do not play the important role that they do in the bipolar. Explain. Would you expect a significant current through the gate due to electron-hole recombination in the p-type region? Why or why not?

(c) A low-input-impedance device is one in which there are large oscillations in input current for small oscillations in the input voltage. Correspondingly, a highinput-impedance device has a small input currentfor a large input voltage. Bearing in mind that the voltage across the forward-biased base-emitter diode of a bipolar transistor is always aboutEgape , while the input current is proportional to the output current, would you say that the bipolar transistor has low or high input impedance? What about the MOSFET?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free