A reflecting telescope is built with a 20cm-diameter mirror having an1.00m focal length. It is used with an10×eyepiece.

What are:

(a) the magnification?

(b) the fnumberof the telescope?

Short Answer

Expert verified

(a). The magnification is 40.

(b). Thefnumberof the telescope is5.0.

Step by step solution

01

Part (a) Step 1: Given Information.

We need to find the magnification.

02

Part (a) Step 2: Simply.

Meye=(25cm)/feye

feye=25/10=2.5cm

Therefore,

Mtelesccope=-fobj/feye=100cm/2.5cm=40.

Here Meyemagnification of the eye, Mtelesccopeis the magnification of a telescope,feyefocal length of the eye.

03

Part (b) Step 1: Given Information.

We need find the f - number of telescope.

04

Part (b) Step 2: Simply.

f-number=fD=100cm20cm=5.0

Here fis focal length Dis the diameter.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Mordern microscopes are more likely to use a camera than human viewing. This is accomplished by replacing the eyepiece in figure 35.14with a photo-ocular that focuses the image of the objectives to a real image on the sensor of a digital camera. A typical sensor is 22.5mmwide and consists of 56254.0μmwide pixels. suppose a microscopist pairs a 40Xobjectives with a 2.5Xphoto-ocular

a. what is the field of view? That is what width on the microscope stage in mmfills the sensor?

b. The photo of a cell is 120pixelsin a diameter. what is the cell's actual diameter inμm?

A microscope with a tube length of 180mmachieves a total magnification of 800Xwith a 40Xobjectives and a 20Xeye piece. The microscope is focused for viewing with a related eye. how far is the sample from the objective lens?

High-power lasers are used to cut and weld materials by focusing the laser beam to a very small spot. This is like using a magnifying lens to focus the sun light to a small spot that can burn things. As an engineer you have designed a laser cutting device in which the material to be cut is placed 5.0cmbehind the lens. you have selected a high-power laser with a wavelength of

your calculation indicates that the laser must be focused to a 5.0-μm-diameterspot in order to have sufficient power to make the cut. what is the minimum diameter of lens you must install?

The Hubble Space Telescope has a mirror diameter of 2.4 m. Suppose the telescope is used to photograph stars near the center of our galaxy, 30,000 light years away, using red light with a wavelength of 650 nm.

a. What’s the distance (in km) between two stars that are marginally resolved? The resolution of a reflecting telescope is calculated exactly the same as for a refracting telescope.

b. For comparison, what is this distance as a multiple of the distance of Jupiter from the sun?

What is thef-numberof a lens with a 35mmfocal length and a7.0mmdiameter aperture?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free