33. II A car tire is 60 cm in diameter. The car is traveling at a speed of 20 m/s.

a. What is the tire's angular velocity, in rpm?

b. What is the speed of a point at the top edge of the tire?

c. What is the speed of a point at the bottom edge of the tire?

Short Answer

Expert verified

sd

Step by step solution

01

sd

sd

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

What is the angular momentum vector of the rotating bar in

How fast, in rpm, would a 5.0kg22cmdiameter bowling ball have to spin to have an angular momentum of 0.23kgm2/s?

The two blocks in FIGURE CP12.86 are connected by a massless rope that passes over a pulley. The pulley is 12 cm in diameter and has a mass of 2.0 kg. As the pulley turns, friction at the axle exerts a torque of magnitude 0.50 N m. If the blocks are released from rest, how long does it take the 4.0 kg block to reach the floor?

Flywheels are large, massive wheels used to store energy. They can be spun up slowly, then the wheel’s energy can be released quickly to accomplish a task that demands high power. An industrial flywheel has a 1.5 m diameter and a mass of 250 kg. Its maximum angular velocity is 1200 rpm.
a. A motor spins up the flywheel with a constant torque of 50 N m. How long does it take the flywheel to reach top speed?
b. How much energy is stored in the flywheel?

c. The flywheel is disconnected from the motor and connected to a machine to which it will deliver energy. Half the energy stored in the flywheel is delivered in 2.0 s. What is the average power delivered to the machine?
d. How much torque does the flywheel exert on the machine?

An 18-cm-long bicycle crank arm, with a pedal at one end, is attached to a 20-cm-diameter sprocket, the toothed disk around which the chain moves. A cyclist riding this bike increases her pedaling rate from 60rpm to 90 rpm in 10s .

a. What is the tangential acceleration of the pedal?

b. What length of chain passes over the top of the sprocket during this interval?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free