Two out-of-phase radio antennas at x = ±300 m on the x-axis are emitting 3.0 MHz radio waves. Is the point (x, y) = (300 m, 800 m) a point of maximum constructive interference, maximum destructive interference, or something in between

Short Answer

Expert verified

The constructive interference of second order is formed

Step by step solution

01

Write the given information

The distance between the two antennas d = 600m

The frequency of the signal f= 3.0MHz

The speed of the signal is c (3x108m/s)

The signals are out of phase, thus the phase difference between the signals is π

02

To determine the kind of interference at (x,y)= (300m,800m)

The wavelength of the signal is expressed as

λ=cf=3×108m/sec3×106sec-1λ=100m

Thus, the wavelength of the signal is 100m.

The following diagram shows the given situation

The distance AB = 600m

The point C is (300m, 800m)

Thus, the vertical distance BC= 800m

From Pythagoras theorem, AC is

AC=6002+8002AC=1000m

Thus, the distance of point C from the radio signal A is 1000m

The path difference of the signal at point C is

x=AC-BCx=(1000-800)mx=200m
The path difference is 200m


If the interference is destructive at point C

The condition satisfied by the path difference is given

role="math" localid="1649934716581" x=m+12λ

here, m is an integer. Now, substitute the values in the above relation to determine m

200=m+12100m=2-12=1.5(notpossible)
Since the value of m is always an integer, thus at point C, there is no destructive interference.

If the interference is constructive at point C

The condition satisfied by the path difference is given

x=mλ200=m(100)m=2
Here, the value of m is an integer, therefore, at point C the constructive interference of second order is formed

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A 25-cm-long wire with a linear density of 20 g/m passes across the open end of an 85-cm-long open-closed tube of air. If the wire, which is fixed at both ends, vibrates at its fundamental frequency, the sound wave it generates excites the second vibrational mode of the tube of air. What is the tension in the wire? Assume vsound = 340 m/s.

Two identical loudspeakers separated by distance xeach

emit sound waves of wavelength λ and amplitude a along the

x-axis. What is the minimum value of the ratio xλ for which

the amplitude of their superposition is also a?

Western music uses a musical scale with equal temperament tuning, which means that any two adjacent notes have the same frequency ratio r. That is, notes n and n + 1 are related by fn+1 = r fn for all n. In this system, the frequency doubles every 12notes—an interval called an octave.

a. What is the value of r?

b. Orchestras tune to the note A, which has a frequency of440 Hz. What is the frequency of the next note of the scale (called A-sharp)?

As the captain of the scientific team sent to Planet Physics, one

of your tasks is to measure g. You have a long, thin wire labeled

1.00 g/m and a 1.25 kg weight. You have your accurate space cadet

chronometer but, unfortunately, you seem to have forgotten a

meter stick. Undeterred, you first find the midpoint of the wire by

folding it in half. You then attach one end of the wire to the wall

of your laboratory, stretch it horizontally to pass over a pulley at

the midpoint of the wire, then tie the 1.25 kg weight to the end

hanging over the pulley. By vibrating the wire, and measuring

time with your chronometer, you find that the wire’s second harmonic

frequency is 100 Hz. Next, with the 1.25 kg weight still

tied to one end of the wire, you attach the other end to the ceiling

to make a pendulum. You find that the pendulum requires 314 s to

complete 100 oscillations. Pulling out your trusty calculator, you

get to work. What value of g will you report back to headquarters?

A 44-cm-diameter water tank is filled with 35 cm of water. A 3.0-mm-diameter spigot at the very bottom of the tank is opened and water begins to flow out. The water falls into a 2.0-cm-diameter, 40-cm-tall glass cylinder. As the water falls and creates noise, resonance causes the column of air in the cylinder to produce a tone at the column’s fundamental frequency. What are (a) the frequency and (b) the rate at which the frequency is changing (Hz/s) when the cylinder has been filling for 4.0 s? You can assume that the height of the water in the tank does not appreciably change in 4.0 s.

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free