Log out Go to App
Go to App

Learning Materials

Features

Discover

Chapter 20: Problem 29

Consider a Carnot engine that works between thermal reservoirs with temperatures of \(1000.0 \mathrm{~K}\) and \(300.0 \mathrm{~K}\). The average power of the engine is \(1.00 \mathrm{~kJ}\) per cycle. a) What is the efficiency of this engine? b) How much energy is extracted from the warmer reservoir per cycle? c) How much energy is delivered to the cooler reservoir?

Short Answer

Expert verified
Answer: The engine's efficiency is 70%, the amount of energy extracted from the warmer reservoir per cycle is about 1428.57 J, and the amount of energy delivered to the cooler reservoir per cycle is about 428.57 J.

Step by step solution

01

Determine the efficiency of the engine

We will use the formula for Carnot engine efficiency: \(\eta = 1 - \frac{T_c}{T_h}\), where \(\eta\) is the efficiency, \(T_c\) is the temperature of the colder reservoir, and \(T_h\) is the temperature of the hotter reservoir. Given \(T_h = 1000.0 \mathrm{~K}\) and \(T_c = 300.0 \mathrm{~K}\), we can calculate the efficiency: \(\eta = 1 - \frac{300.0}{1000.0} = 1 - 0.3 = 0.7\) The engine's efficiency is 70%.
02

Calculate the energy extracted from the warmer reservoir per cycle

We know the power, which represents the useful work done per cycle, is equal to \(1.00 \mathrm{~kJ}\) or \(1000.0 \mathrm{~J}\). Efficiency is defined as the ratio of useful work done to the energy extracted from the hotter reservoir we will call \(Q_h\). Therefore, we can set up the equation: \(\eta = \frac{W}{Q_h}\) Now, we can solve for \(Q_h\): \(Q_h = \frac{W}{\eta} = \frac{1000.0 \mathrm{~J}}{0.7} \approx 1428.57 \mathrm{~J}\) The amount of energy extracted from the warmer reservoir per cycle is about 1428.57 J.
03

Calculate the energy delivered to the cooler reservoir per cycle

Energy conservation implies that the energy extracted from the warmer reservoir is equal to the sum of the useful work done by the engine and the energy delivered to the cooler reservoir, which we will call \(Q_c\). Therefore, we can write the equation: \(Q_h = W + Q_c\) Now, we can solve for \(Q_c\): \(Q_c = Q_h - W = 1428.57 \mathrm{~J} - 1000.0 \mathrm{~J} \approx 428.57 \mathrm{~J}\) The amount of energy delivered to the cooler reservoir per cycle is about 428.57 J.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Start your free trial

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Consider a system consisting of rolling a six-sided die. What happens to the entropy of the system if an additional die is added? Does it double? What happens to the entropy if the number of dice is three?

Consider a room air conditioner using a Carnot cycle at maximum theoretical efficiency and operating between the temperatures of \(18^{\circ} \mathrm{C}\) (indoors) and \(35^{\circ} \mathrm{C}\) (outdoors). For each 1.00 J of heat flowing out of the room into the air conditioner: a) How much heat flows out of the air conditioner to the outdoors? b) By approximately how much does the entropy of the room decrease? c) By approximately how much does the entropy of the outdoor air increase?

You are given a beaker of water. What can you do to increase its entropy? What can you do to decrease its entropy?

A Carnot engine operates between a warmer reservoir at a temperature \(T_{1}\) and a cooler reservoir at a temperature \(T_{2}\). It is found that increasing the temperature of the warmer reservoir by a factor of 2 while keeping the same temperature for the cooler reservoir increases the efficiency of the Carnot engine by a factor of 2 as well. Find the efficiency of the engine and the ratio of the temperatures of the two reservoirs in their original form.

A coal-burning power plant produces \(3000 .\) MW of thermal energy, which is used to boil water and produce supersaturated steam at \(300 .{ }^{\circ} \mathrm{C}\). This high-pressure steam turns a turbine producing \(1000 .\) MW of electrical power. At the end of the process, the steam is cooled to \(30.0^{\circ} \mathrm{C}\) and recycled. a) What is the maximum possible efficiency of the plant? b) What is the actual efficiency of the plant? c) To cool the steam, river water runs through a condenser at a rate of \(4.00 \cdot 10^{7} \mathrm{gal} / \mathrm{h}\). If the water enters the condenser at \(20.0^{\circ} \mathrm{C}\), what is its exit temperature?
See all solutions

Recommended explanations on Physics Textbooks

Dynamics

Read Explanation

Electrostatics

Read Explanation

Work Energy and Power

Read Explanation

Engineering Physics

Read Explanation

Mechanics and Materials

Read Explanation

Thermodynamics

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free