If the electric potential at a single point is known, can Eat that point be determined? If so, how? If not, why not?

Short Answer

Expert verified

We can calculate the electric field from the changing of the potential energy. 80, in this case, We can‘t determine the electric energy.

Step by step solution

01

About electric potential

electric potential, the amount of work needed to move a unit charge from a reference point to a specific point against an electric field.Typically, the reference point is Earth, although any point beyond the influence of the electric field charge can be used

02

Determine the electric energy

As We know the electric energy is given by the negative gradient of the electric potential

Solution:

As we mention in the concept session, the electric field is equal to the negative sign of the potential gradient

Therefore we can calculate the electric field from the changing of the potential energy. In this case, We can‘t determine the electric energy.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

In the circuit, in Fig. E26.47 the capacitors are initially uncharged, the battery has no internal resistance, and the ammeter is idealized. Find the ammeter reading (a) just after the switch S is closed and (b) after S has been closed for a very long time.

CALC The region between two concentric conducting spheres with radii and is filled with a conducting material with resistivity ρ. (a) Show that the resistance between the spheres is given by

R=ρ4π(1a-1b)

(b) Derive an expression for the current density as a function of radius, in terms of the potential differenceVab between the spheres. (c) Show that the result in part (a) reduces to Eq. (25.10) when the separation L=b-abetween the spheres is small.

BIO The average bulk resistivity of the human body (apart from surface resistance of the skin) is about 5.0Ω·m. The conducting path between the hands can be represented approximately as a cylinder 1.6 m long and 0.10 m in diameter. The skin resistance can be made negligible bysoaking the hands in salt water. (a) What is the resistance between the hands if the skin resistance is negligible? (b) What potential difference between thehands is needed for a lethal shock current of 100 mA ? (Note that your result shows that small potential differences produce dangerous currents when the skin is damp.) (c) With the current in part (b),what power is dissipated in the body?

An electrical conductor designed to carry large currents has a circular cross section 2.50 mm in diameter and is 14.0 m long. The resistance between its ends is 0.104Ω. (a) What is the resistivity of the material? (b) If the electric-field magnitude in the conductor is 1.28 V/m, what is the total current? (c) If the material has 8.5×1028free electrons per cubic meter, find the average drift speed under the conditions of part (b).

A fuse is a device designed to break a circuit, usually by melting when the current exceeds a certain value. What characteristics should the material of the fuse have?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free