An L-R-C series circuit with L = 0.120 H, R = 240 Ω, and C = 7.30 mF carries an rms current of 0.450 A with a frequency of 400 Hz. (a) What are the phase angle and power factor for this circuit? (b) What is the impedance of the circuit? (c) What is the rms voltage of the source? (d) What average power is delivered by the source? (e) What is the average rate at which electrical energy is converted to thermal energy in the resistor? (f) What is the average rate at which electrical energy is dissipated (converted to other forms) in the capacitor? (g) In the inductor?

Short Answer

Expert verified

The phase angle is 45.8°,power factor is 0.697,impedance is 344Ω, rms voltage of the source is 155V, the average power delivered by the source is 48.6W, the average rate at which electrical energy is converted to thermal energy in the resistor is 48.6W, the average rate at which energy is dissipated in the capacitor is 0 and the average rate at which energy is dissipated in the inductor is also 0.

Step by step solution

01

Step-1: Formula and important concepts

The angle between the voltage and current phasors is given by the equation

tanϕ=(XL-XCR)

The inductive reactance of the coil can be calculated by XL=ωL and capacitive reactance by XC=1ωC. Impedance is given by Z=R2+(XL-XC)2. The expression for rms voltage isVrms=IrmsZ and the expression for average power isPavg=VrmsIrmscosϕ and also Pavg=(Irms)2R.

02

Step-2: Calculations for phase angle, power factor and impedance 

Plug the values for L and to get inductive reactance and also C and ωto get capacitive reactance.

XL=2ττfL=2ττ400Hz0.120H=301.6Ω

XC=12ττfC=12ττ400Hz7.3×10-6F=54.5Ω

tanϕ=301.6-54.5240=1.028

Hence, the angle is ϕ=+45.8°and the power factorcosϕ=0.697

Z=2402+301.6-54.52Ω=344Ω

Hence, the value of impedance is 344Ω.

03

Step-3: Calculations for rms voltage of the source

Vrms=0.450A344Ω=155V

Therefore, the rms voltage is 155V.

04

Step-4: Calculations for powers and rate of dissipation

Pavg=155V0.450A0.697=48.6W

Therefore, the average power delivered by the source is 48.6W.

The average rate here represents the average power dissipated into the resistor, so we use equation Pavg=Irms2R.

Pavg=155V0.450A0.697=48.6W

It is the same result as of part (d).

So, as shown in the parts (d) and (e), all generated power is dissipated in the resistor R only. Hence, no power is consumed in the capacitor and inductor.

This occurs because the capacitor charges and discharges the energy when it is connected to ac source.

Hence, the answers for all the parts are:

(a)ϕ=+45.8° andcosϕ=0.697

(b)Z=344Ω

(c) Vrms=155V

(d) Pavg=48.6W,(e)Pavg=48.6W

(f)Pavg=0,(g)Pavg=0

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A 12.4-µF capacitor is connected through a 0.895-MΩ resistor to a constant potential difference of 60.0 V. (a) Compute the charge on the capacitor at the following times after the connections are made: 0, 5.0 s, 10.0 s, 20.0 s, and 100.0 s. (b) Compute the charging currents at the same instants. (c) Graph the results of parts (a) and (b) for t between 0 and 20 s

An idealized ammeter is connected to a battery as shown in Fig.

E25.28. Find (a) the reading of the ammeter, (b) the current through the4.00Ω

resistor, (c) the terminal voltage of the battery.

Fig. E25.28.

An 18-gauge copper wire (diameter 1.02 mm) carries a current

with a current density of 3.2×106Am2. The density of free electrons for

copper is8.5×1028electrons per cubic meter. Calculate (a) the current in

the wire and (b) the drift velocity of electrons in the wire.

BIO Transmission of Nerve Impulses. Nerve cells transmit electric

signals through their long tubular axons. These signals propagate due to a

sudden rush of Na+ions, each with charge +e, into the axon. Measurements

have revealed that typically about 5.6×1011Na+ions enter each meter of the

axon during a time of . What is the current during this inflow of charge

in a meter of axon?

The current in a wire varies with time according to the relationship

I=55A-(0.65As2)t2. (a) How many coulombs of charge pass a cross section of the wire in

the time interval between t=0and role="math" localid="1655721302619" t=8.0s? (b) What constant current would transport the

same charge in the same time interval?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free