Two long, parallel wires are separated by a distance of 0.400 m shown in fig.The currentsand have the directions shown. Each current is doubled, so thatbecomes 10.0 A andbecomes 4.00 A. Now what is the magnitude of the force that each wire exerts on a 1.20-m length of the other?

Short Answer

Expert verified

The magnitude of the force that each wire exerts on a 1.20-m length of the other is 24.0×10-6N .

Step by step solution

01

Step 1: The force per unit length between two parallel current carrying wires

The force per unit length between two current carrying wires is given by

FL=μ0d22πd

Where, μ0is the permeability of vaccum, l1and l2is the current through the two wires and d is the distance between wire

Attraction and repulsion between two parallel current carrying wires

When the current is flowing in same direction in both parallel wires then attraction occurs between two wires.

When the current is flowing in opposite direction in both parallel wires then repulsion occurs between two wires.

02

Step 2:  The calculation of magnitude of the force that each wire exerts on a 1.20m  length of the other

Given : Distance between parallel wires is d = 0.400m

The currents in wires are l1=10.0Aand l2=4.00A

Using formula

FL=μ022πd

Now, putting the values of constants in above equation

F1.20m=4π×107×10.0×4.002π(0.400)F=2.00×108×1.20F=24.0×108N

Thus, the magnitude of the force that each wire exerts on a 1.20-m length of the other is 24.0×106N.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Why does an electric light bulb nearly always burn out just as you turn on the light, almost never while the light is shining?

Section 27.2 describes a procedure for finding the direction of the magnetic force using your right hand. If you use the same procedure, but with your left hand, will you get the correct direction for the force? Explain.

A typical small flashlight contains two batteries, each having an emf of1.5V, connected in series with a bulb having resistance17Ω. (a) If the internal resistance of the batteries is negligible, what power is delivered to the bulb? (b) If the batteries last for1.5hwhat is the total energy delivered to the bulb? (c) The resistance of real batteries increases as they run down. If the initial internal resistance is negligible, what is the combined internal resistance of both batteries when the power to the bulb has decreased to half its initial value? (Assume that the resistance of the bulb is constant. Actually, it will change somewhat when the current through the filament changes, because this changes the temperature of the filament and hence the resistivity of the filament wire.)

The heating element of an electric dryer is rated at 4.1 kW when connected to a 240-V line. (a) What is the current in the heating element? Is 12-gauge wire large enough to supply this current? (b) What is the resistance of the dryer’s heating element at its operating temperature? (c) At 11 cents per kWh, how much does it cost per hour to operate the dryer?

A 10.0cm long solenoid of diameter 0.400 cm is wound uniformly with 800 turns. A second coil with 50 turns is wound around the solenoid at its center. What is the mutual inductance of the combination of the two coils?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free