The charged plates of a capacitor attract each other, so to pull the plates farther apart requires work by some external force. What becomes of the energy added by this work? Explain.

Short Answer

Expert verified

The required work done is stored as energy in the capacitor

This energy is stored as electrostatic potential energy in the plates.

Step by step solution

01

About Capacitance Potential Energy

Using the equations for charge-potential difference relation on capacitance and the formula of capacitance, one can find the effect made when a certain parameter is changed.

02

:Determine the Energy stored

Given

We do work to keep the two plates separated.

Explanation

The energy stored in the capacitor is given by

When we pull the plates, the distance between both plates increases and as the capacitance is inversely proportional to the distance as shown in equation (2), the capacitance decreases

As shown by equation (1), the energy stored will increase as the capacitance decreases when theseparateddistance increases. Therefore there is an increase in energy, this increase represents the work done is stored as energy in the capacitor.

Therefore The required work done is stored as energy in the capacitor

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

(See Discussion Question Q25.14.) Will a light bulb glow more brightly when it is connected to a battery as shown in Fig. Q25.16a, in which an ideal ammeter is placed in the circuit, or when it is connected as shown in Fig. 25.16b, in which an ideal voltmeter V is placed in the circuit? Explain your reasoning.

A beam of protons traveling at 1.20 km/s enters a uniform magnetic field, traveling perpendicular to the field. The beam exits the magnetic field, leaving the field in a direction pependicurlar to its original direction (Fig. E27.24). The beam travels a distance of 1.10 cm while in the field. What is the magnitude of the magnetic field?

In the circuit shown in Fig. E26.18,ε=36.V,R1=4.0Ω,R2=6.0Ω,R3=3.0Ω(a) What is the potential difference Vab between points a and b when the switch S is open and when S is closed? (b) For each resistor, calculate the current through the resistor with S open and with S closed. For each resistor, does the current increase or decrease when S is closed?

Two copper wires with different diameter are joined end to end. If a current flow in the wire combination, what happens to electrons when they move from the large diameter wire into the smaller diameter wire? Does their drift speed increase, decrease, or stay the same? If the drift speed change, what is the role the force that causes the change? Explain your reasoning.

An electrical conductor designed to carry large currents has a circular cross section 2.50 mm in diameter and is 14.0 m long. The resistance between its ends is 0.104Ω. (a) What is the resistivity of the material? (b) If the electric-field magnitude in the conductor is 1.28 V/m, what is the total current? (c) If the material has 8.5×1028free electrons per cubic meter, find the average drift speed under the conditions of part (b).

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free