If you stretch a rubber band and pluck it, you hear a (somewhat) musical tone. How does the frequency of this tone change as you stretch the rubber band further? (Try it!) Does this agree with Eq. (15.35) for a string fixed at both ends? Explain.

Short Answer

Expert verified

When the rubber band is stretched, the frequency of the tone produced will increases.

Step by step solution

01

Concept of frequency of a tone.

The length of the rubber band and the tension that is created inside of it determine the frequency of the tone. The frequency varies as a result of the rubber band being stretched.

02

Formula of frequency of the string.

If we stretch the string then its length increases and the tension in the spring also increase. The frequency of the tone depends upon both tension and length of the rubber band which can be represented by the expression given below,

f=12LFμ

Here, f is the frequency of the wave, L is the length of a rubber band, F is the tension in the rubber band. μ is the mass per unit length.

Therefore, when the rubber band is stretched, the frequency of the tone produced will increases.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

BIO The Human Voice. The human vocal tract is a pipe that extends about 17 cm from the lips to the vocal folds (also called “vocal cords”) near the middle of your throat. The vocal folds behave rather like the reed of a clarinet, and the vocal tract acts like a stopped pipe. Estimate the first three standing-wave frequencies of the vocal tract. Use v = 344 m/s. (The answers are only an estimate, since the position of lips and tongue affects the motion of air in the vocal tract.)

A violinist is tuning her instrument to concert A (440Hz). She plays the note while listening to an electronically generated tone of exactly that frequency and hears a beat frequency of 3Hz, which increases to 4Hzwhen she tightens her violin string slightly. (a) What was the frequency of the note played by her violin when she heard the3Hz beats? (b) To get her violin perfectly tuned to concert A, should she tighten or loosen her string from what it was when she heard the 3Hzbeats?

The fundamental frequency of a pipe that is open at both ends is 524 Hz. (a) How long is this pipe? If one end is now closed, find (b) the wavelength and (c) the frequency of the new fundamental.

A thin, 75.0cm wire has a mass of 16.5g. One end is tied to a nail, and the other end is attached to a screw that can be adjusted to vary the tension in the wire. (a) To what tension (in newtons) must you adjust the screw so that a transverse wave of wavelength 3.33 cm makes 625 vibrations per second? (b) How fast would this wave travel?

15.4. BIO Ultrasound Imaging. Sound having frequencies above the range of human hearing (about 20,000 Hz) is called ultrasound. Waves above this frequency can be used to penetrate the body and to produce images by reflecting from surfaces. In a typical ultrasound scan, the waves travel through body tissue with a speed of 1500 m/s . For a good, detailed image, the wavelength should be no more than 1.0 mm. What frequency sound is required for a good scan?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free