A soprano and a bass are singing a duet. While the soprano sings an A-sharp at 932 Hz, the bass sings an A-sharp but three octaves lower. In this concert hall, the density of air is 1.20 kg/m3and its bulk modulus is1.42×105Pa. In order for their notes to have the same sound intensity level, what must be (a) the ratio of the pressure amplitude of the bass to that of the soprano and (b) the ratio of the displacement amplitude of the bass to that of the soprano? (c) What displacement amplitude (in m and in nm) does the soprano produce to sing her A-sharp at 72.0 dB?

Short Answer

Expert verified

A) The ratio of pressure amplitude of the bass to that of the soprano is 1.00.B) The ratio of displacement amplitude of the bass to the soprano is 8.00.C) The displacement amplitude produced by the soprano to sing A-sharp at 72.0 dB is 47.3 nm

Step by step solution

01

STEP 1 Calculate the ratio of pressure amplitude of the soprano from the relation between the intensity to pressure

Formula is lS=vp2maxs2Bwhere, p2maxsis the pressure amplitude of the soprano. B is the bulk modulus of the air, lSis the intensity of the soprano. is the speed of sound in air.

The intensity of the bass is role="math" localid="1668079470446" lb=124π2fb2Ab2ρBand the intensity of the soprano is ls=124π2fs2As2ρBwhere, lbis the intensity of the bass, B is the bulk modulus of the air. p is the density of the air. fb. is the frequency of the bass, fs is the frequency of soprano and is the intensity of soprano

02

Calculate the ratio of pressure amplitude of the soprano

Rewrite the above relation in terms of p2maxswhich is given aspmaxs=2Blsv

Formula to calculate the pressure amplitude of the bass ispmaxb=2Blbv where, pmaxbis the pressure amplitude of the basslb is the intensity of the bass

It is given that the intensity of the both the bass and soprano is same. Divide equation (Il) by the equation (l) to findrole="math" localid="1668080143577" pmaxb/pmaxs

role="math" localid="1668080153255" pmaxbpmaxs=2Blsv2Blsv=lbls

Substitute I for lb and I for ls in the above equation to findpmaxb/pmaxs

pmaxbpmaxs=ll=1.00

Therefore, the ratio of pressure amplitude of the bass to that of the soprano is 1.00.

03

Calculate the ratio of displacement amplitude of the bass to the soprano

The intensity of the bass is lb=124π2fb2Ab2ρB (Ill)and the intensity of the soprano is ls=124π2fs2As2ρB(IV)

It is given that the intensity of the both the bass and soprano is same so that.

Substitute equation (Ill) and (IV) in the equation (V) to findAbAs

124π2fb2Ab2ρB=124π2fs2As2ρBfb2Ab2=fs2As2Ab2As2=fs2fb2AbAs=fsfb

Formula to calculate the frequency of the bass is, Substitute 932 Hz for fs in the above equation to find fb

fb=fs8=116.5Hz

Thus, the frequency of the bass is 116.5Hz

Substitute 116.5 Hz for fb and 932 Hz for fs to find Ab/As

AbAs=932Hz116.5Hz=8.00

Therefore, the ratio of displacement amplitude of the bass to the soprano is 8.00.

04

Calculate the displacement amplitude of the soprano

Formula is given byA=12πf2lρB and the intensity of the level of sound is Where,β=10logll0is the intensity level of the sound,l0is the intensity level of the reference sound.

Substitute 72.0 dB forβ and 1×10-12W/m2in the above equation to find I

72.0dB=(10dB)log11×1012W/m2log11×1012W/m2=72.0dB(10dB)I=10721×1012W/m2=1.585×1015W/m2

Thus, the intensity of the soprano is 1.585×10-15W/m2

A=12π(932Hz)21.585015W/m21.20kg/m31.42×105Pa=4.73×108m=47.3nm

Therefore, the displacement amplitude produced by the soprano to sing A-sharp at 72.0 dB is 47.3 nm

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A thin, 75.0cm wire has a mass of 16.5g. One end is tied to a nail, and the other end is attached to a screw that can be adjusted to vary the tension in the wire. (a) To what tension (in newtons) must you adjust the screw so that a transverse wave of wavelength 3.33 cm makes 625 vibrations per second? (b) How fast would this wave travel?

Consider a sound wave in air that has displacement amplitude 0.0200 mm. Calculate the pressure amplitude for frequencies of (a) 150 Hz; (b) 1500 Hz; (c) 15,000 Hz. In each case compare the result to the pain threshold, which is 30 Pa.

Two train whistles, A and B, each have a frequency of 393Hz. A is stationary and B is moving toward the right (away from A) at a speed of 35m/s. A listener is between the two whistles and is moving toward the right with a speed of 15m/s. No wind is blowing. (a) What is the frequency from A as heard by the listener? (b) What is the frequency from B as heard by the listener? (c) What is the beat frequency detected by the listener?

(a) A sound source producing 1.00-kHz waves moves toward a stationary listener at one-half the speed of sound. What frequency will the listener hear? (b) Suppose instead that the source is stationary and the listener moves toward the source at one-half the speed of sound. What frequency does the listener hear? How does your answer compare to that in part (a)? Explain on physical grounds why the two answers differ.

In most modern wind instruments the pitch is changed by

using keys or valves to change the length of the vibrating air column.

The bugle, however, has no valves or keys, yet it can play many notes. How might this be possible? Are there restrictions on what notes a bugle can play?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free